Sprint (Full Size)
Tips On Choosing Full Size Sprint Books
Sprint cars can be built from a pre-fab chassis or from a scratch design. In either circumstance, it is useful for you to have a good knowledge of vehicle dynamics so that the handling of the car can be understood during setup and racing. We suggest starting with a book on vehicle dynamics, preferably including oval/circle track racing.
For both pre-fab and scratch builders, we would also suggest a guide to chassis and suspension setup for circle track which is useful in understanding the particular hardware associated with the car. For scratch builders, we would suggest books on chassis/suspension design and metal fabrication. Look for books that cover both dirt and asphalt.
Advanced Race Car Chassis Technology: Winning Chassis Design and Setup for Circle Track and Road Race Cars
Primarily aimed at circle track racing cars, this book provides broad coverage of stock or circle track car handling principles. It includes weight dynamics, suspension, aerodynamics, gearing and safety information as well as dirt and asphalt setup information.
Chassis Engineering: Chassis Design, Building & Tuning for High Performance Handling
Chassis Engineering is a great introduction to race car design. In a practical and down-to-earth way, it covers the fundamentals of how race cars handle and the requirements for designing and constructing a car. The book includes chapters on chassis design, suspension design, frame construction, aerodynamics and tuning. Overall it provides the reader with the foundation of how the key components of a race car work and interact together.
Dirt Track Chassis and Suspension: Advanced Setup and Design Technology for Dirt Track Racing
Racing Chassis and Suspension Design: PT-90
A compilation of 27 SAE (Society of Automotive Engineers) papers selected by racing engineer legend Carroll Smith which focus on chassis and suspension design for pure race cars. These papers provide deep insights and practical and usable information for chassis and race car designers.
The Race Car Chassis : Design, Structures and Materials for Road, Drag and Circle Track Open- and Closed-Wheel Chassis
Aspiring designers will find Forbes Aird's book on chassis design to be a good introduction to the fundamental purposes, structures and materials of race car (or road car) chassis. What the book might lack in formulas and design calculations, it makes up for in sheer breadth of chassis design and construction ideas. It provides sufficient information to the reader to leave them with a solid understanding of the various chassis types, materials and construction so they can make informed choices about designing their own chassis.
Carroll Smith's Nuts, Bolts, Fasteners and Plumbing Handbook
Advanced Automotive Welding
Advanced Automotive welding teaches basic and advanced welding skills specifically geared toward race car construction. Joint types, metal types, and welding processes such as TIG, MIG, oxy-acetylene and stick welding are covered. Includes projects such as roll cage, seat supports, floor pan and others.
Engineer To Win: The essential guide to racing car materials technology
How To Weld
A complete guide for beginner welders on the history, safety, equipment and techniques for welding. The book covers metal fabrication tools, types and properties of metals, welding joint designs, gas welding, brazing, arc welding (MIG, TIG, stick) and cutting. It also includes sample exercises to help the reader practice what they have learned.
Metal Fabricator's Handbook
Professional Sheet Metal Fabrication
David Vizard's How to Build Horsepower
A guide to designing the engine as a system and constructing it to produce maximum horsepower. The design aspects use the airflow through each part of the engine as a basis for instruction. Provides detailed information on how to select, modify and tune each component to work at peak efficiency with others in the engine.
Engine Builder's Handbook
High-Performance Differentials, Axles, and Drivelines
How to Rebuild & Modify High-Performance Manual Transmissions
Teaches how to perform step-by-step modifcations and upgrading to any manual transmission. Shows how to tear down, identify worn parts, select the best components and assemble a high performance transmission. Includes picture-documented building of GM Muncie 4 speed, Borg Warner Super & early T10 4 speed, Ford Toploader 4 speed, Tremec/Borg Warner T5 and Chrysler A833.
How to Rebuild and Modify Your Manual Transmission
Provides a practical understanding of the internal workings of a manual transmissions and how to rebuild and modify them. Includes information on both front and rear-wheel drive transmissions and guides the reader on the selection, measurement, specifications and replacement of components.
Modern Engine Blueprinting Techniques: A Practical Guide to Precision Engine Building
Explains the engine blueprinting process through illustrations and detailed procedures. Includes professional techniques on how to balance, make true and match components as an optimized group. Components include block, crank, connecting rods, pistons, rings, cylinder heads, intake manifolds, camshafts.
Performance Automotive Engine Math
Use the concept of designing the complete engine as a system, this book illustrates how formulas can be used to define sizes, clearances, and capabilities for components. This enables components to compliment and maximize each others performance, resulting in a superior high performance engine and saving money for the builder by selecting the right components.
Performance Exhaust Systems: How to Design, Fabricate, and Install
Explains how to design and construct exhaust systems matched to the engine to optimize power. The book includes theory and practical design of the entire exhaust system (headers, resonators, catalytic converters, mufflers) and teaches how to fabricate or select and purchase the individual components to match the design. The book also shows metal working techniques for fabricating full-custom systems.
Performance Fuel Injection Systems HP1557
A guide on modifying and tuning EFI systems. The book covers the foundations of EFI systems (wiring, sensors, ignition, etc.) and their function as well as the various options for developing your own solution--retuning Factory ECUs, piggyback computers and complete engine management systems. Case studies are provided to demonstrate practical approaches.
Racing Engine Builder's Handbook: How to Build Winning Drag, Circle Track, Marine and Road Racing Engines
Practical tips and techniques on building a racing engine. This book covers applications such as drag racing, circle track, road racing and boats. The author's approach looks at math used in modifications, combined with examples and guidance on when and how to apply complimentary modifcations.
The Shock Absorber Handbook
How to Make Your Car Handle
Teaches how to improve vehicle handling through suspension and chassis modifications and understanding vehicle dynamics. Includes basic suspension theory on roll centers, roll axis, camber change, bump steer, anti-dive, ride rate, ride balance as well practical chassis modifications.
Race Car Vehicle Dynamics (R146)
A comprehensive book on the vehicle dynamics of race cars (and applicable to road cars). Includes the most in-depth theoretical knowledge about vehicle handling, suspension and dynamics available in a single book. Along with clear explanations of principles there is a large mathematical component for engineering design. Can be used as a university textbook for vehicle engineering/Formula SAE/Student.
Tune to Win: The art and science of race car development and tuning
The fundamentals of race car vehicle dynamics in a clear, well-written text. Explains suspension, weight dynamics and vehicle handling behaviours in a way that permits the designer to understand cause and effect and improve their race car design, vehicle tuning and even driving.
|Whole Car (Design)|
Race Car Design
|Whole Car (Design)|
Race Car Engineering & Mechanics
Paul Van Valkenburgh's guide to understanding how the many components of the entire race car fit and work together. He provides design theory and practical information on tires, wheels, suspension geometry, springs, anti-roll bars, brakes, aerodynamics, handling, engine supports, chassis, safety and even racing operations such as testing and pit lane procedures.
|Whole Car (Preparation)|
Sprint Car Chassis Technology
Information on winged and wingless sprint car chassis and tuning. Explains the chassis and its function, adjusting the chassis, step-by-step setup, chassis alignment, torsion bar and coil over suspensions, using stagger and tracking. For both dirt and asphalt track cars.